Send documentation comments to mdsfeedback-doc@cisco.com
16-16
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 16 N Commands
ntp sync-retry
ntp sync-retry
To retry synchronization with configured servers, use the ntp sync-retry command.
ntp sync-retry
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the sup-fc0 message logs.
switch# ntp sync-retry
Related Commands
Release Modification
3.1(1) This command was introduced.
Command Description
ntp distribute Enables CFS distribution for NTP.
show ntp Displays NTP information.
To Next Page
Loading...
Need help?
General