Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
23-52
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
transfer-ready-size
transfer-ready-size
To configure the target transfer ready size for SCSI write commands on a SAN tuner extension N port,
use the transfer-ready-size command.
transfer-ready-size bytes
Syntax Description
Defaults None.
Command Modes SAN extension N port configuration submode.
Command History
Usage Guidelines For a SCSI write command-id command with a larger transfer size, the target performs multiple
transfers based on the specified transfer size.
Examples The following example configures the transfer ready size on a SAN extension tuner N port.
switch# san-ext-tuner
switch(san-ext)# nWWN 10:00:00:00:00:00:00:00
switch(san-ext)# nport pwwn 12:00:00:00:00:00:00:56 vsan 13 interface gigabitethernet
1/2
switch(san-ext-nport)# transfer-ready-size 512000
Related Commands
bytes Specifies the transfer ready size in bytes. The range is 0 to 2147483647.
Release Modification
2.0(x) This command was introduced.
Command Description
nport pwwn Configures a SAN extension tuner N port.
san-ext-tuner Enables the SAN extension tuner feature.
show san-ext-tuner Displays SAN extension tuner information.
write command-id Configures a SCSI write command for a SAN extension tuner N
port.