Send documentation comments to mdsfeedback-doc@cisco.com
4-57
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ipv6 neighbors
clear ipv6 neighbors
To clear the IPv6 neighbor cache table, use the clear ipv6 neighbors command.
clear ipv6 neighbors
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example flushes the IPv6 neighbor cache table.
switch# clear ipv6 neighbors
switch#
Related Commands
Release Modification
3.1(0) This command was introduced.
Command Description
ipv6 nd Configures IPv6 neighbor discovery commands.
show ipv6 neighbors Displays IPv6 neighbors configuration information.
To Next Page
Loading...
Need help?
General