Send documentation comments to mdsfeedback-doc@cisco.com
4-91
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear user
clear user
To clear trusted SSH hosts, use the clear user command in EXEC mode.
clear user username
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows how to log out a specified user.
switch# clear user vsam
Related Commands
username Specifies the user name to clear.
Release Modification
1.2(1) This command was introduced.
Command Description
show users Displays user information.
To Next Page
Loading...
Need help?
General