Send documentation comments to mdsfeedback-doc@cisco.com
15-7
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 15 M Commands
member (fcalias configuration submode)
Command History
Usage Guidelines None.
Examples The following example shows how to add a member to an FC alias called samplealias.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# fcalias name samplealias
switch(config-fcalias)#
The following example defines an IPv6 address for the member.
switch(switch(config-fcalias)# member ip-address 2020:dbc0:80::4076
The following example shows how to delete the specified member.
switch(config-fcalias)# no member ip-address 2020:dbc0:80::4076
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
fcalias name Configures an FC alias.
show fcalias Displays the member name information in an FC alias.
To Next Page
Loading...
Need help?
General