Send documentation comments to mdsfeedback-doc@cisco.com
22-325
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show sme cluster
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the configuration details about a cluster:
switch# show sme cluster c1
Cluster ID is 0x2b2a0005300035e1
Cluster status is online
Security mode is advanced
Total Nodes are 1
Recovery Scheme is 2 out of 5
Fabric[0] is Fabric_name-excal10
KMC server 10.21.113.117:8800 is provisioned, connection state is initializing
Master Key GUID is 10af119cfd79c17f-ee568878c049f94d, Version: 0
Shared Key Mode is Not Enabled
Auto Vol Group is Not Enabled
Tape Compression is Not Enabled
Tape Key Recycle Policy is Not Enabled
Key On Tape is Not Enabled
Cluster Infra Status : Operational
Cluster is Administratively Up
Cluster Config Version : 24
The following example displays the cluster interface information:
switch# show sme cluster clustername1 interface it-nexus
-------------------------------------------------------------------------------
Host WWN VSAN Status Switch Interface
Target WWN
-------------------------------------------------------------------------------
10:00:00:00:c9:4e:19:ed,
2f:ff:00:06:2b:10:c2:e2 4093 online switch sme4/1
detail Displays Cisco SME cluster details.
summary Shows Cisco SME cluster summary.
Release Modification
3.2(2) This command was introduced.
To Next Page
Loading...
Need help?
General