Cisco mds 9124 - fabric switch User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
22-139
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show install all status
Extracting “loader” version from image bootflash:/b-1.3.0.104.
-- SUCCESS
switch# show install all status
This is the log of last installation. <<<<<< log of last install
Verifying image bootflash:/b-1.3.0.104
-- SUCCESS
Verifying image bootflash:/i-1.3.0.104
-- SUCCESS
Extracting “system” version from image bootflash:/i-1.3.0.104.
-- SUCCESS
Extracting “kickstart” version from image bootflash:/b-1.3.0.104.
-- SUCCESS
Extracting “loader” version from image bootflash:/b-1.3.0.104.
-- SUCCESS
Use the show install all status command to view the output of a nondisrtuptive software upgrade process
on the Cisco MDS 9124 Fabric Switch.
switch# show install all status
This is the log of last installation.
Continuing with installation process, please wait.
The login will be disabled until the installation is completed.
Status for linecard upgrade.
-- SUCCESS
Performing supervisor state verification.
-- SUCCESS
Install has been successful.

Cisco mds 9124 - fabric switch Specifications

General

Brand	Cisco
Model	mds 9124 - fabric switch
Category	Switch
Language	English