Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-189
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show iscsi stats
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
30 packets output, 1744 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iscsi8/4
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iscsi8/5
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iscsi8/6
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iscsi8/7
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
iscsi8/8
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments
0 packets output, 0 bytes
0 Response pdus (with sense 0), 0 R2T pdus
0 Data-in pdus, 0 Data-in bytes
The following command displays detailed iSCSI statistics.
switch# show iscsi stats detail
iscsi8/1
5 minutes input rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
5 minutes output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
iSCSI statistics
0 packets input, 0 bytes
0 Command pdus, 0 Data-out pdus, 0 Data-out bytes, 0 fragments