Send documentation comments to mdsfeedback-doc@cisco.com
21-44
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
snmp-server tcp-session
snmp-server tcp-session
To enable one time authentication for SNMP over a TCP session, use the snmp-server tcp-session
command in configuration mode. To disable one time authentication for SNMP over a TCP session, use
the no form of the command.
snmp-server tcp-session [auth]
no snmp-server tcp-session [auth]
Syntax Description
Command Default One time authentication for SNMP over a TCP session is on.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example enables one time authentication for SNMP over a TCP session.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# snmp-server tcp-session auth
Related Commands
auth Enables one time authentication for SNMP over a TCP session.
Release Modification
3.1 This command was introduced.
Command Description
show snmp Displays SNMP information.
To Next Page
Loading...
Need help?
General