Send documentation comments to mdsfeedback-doc@cisco.com
21-108
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system memlog
system memlog
To collect system memory statistics, use the system memlog command in EXEC mode.
system memlog
Syntax Description This command has no arguments or keywords.
Defaults Enabled.
Command Modes EXEC mode.
Command History
Usage Guidelines Use this command for debugging and troubleshooting purposes.
Examples The following example enables system memory logging.
switch# system memlog
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General