Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-30
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cimserver status
show cimserver status
To display the cimserver status, use the show cimserver status command.
show cimserver status
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines None.
Examples The following example displays the cimserver status.
switch# show cimserver status
cimserver is enabled
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
cimserver enable Starts cimserver.