Send documentation comments to mdsfeedback-doc@cisco.com
22-173
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ips status
show ips status
To display the IP storage status, use the show ips status command.
show ips status [module slot]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the IP storage status for all modules on the switch.
switch# show ips status
Port 8/1 READY
Port 8/2 READY
Port 8/3 READY
Port 8/4 READY
Port 8/5 READY
Port 8/6 READY
Port 8/7 READY
Port 8/8 READY
The following example displays the IP storage status for the module in slot 9.
switch# show ips status module 9
Port 9/1 READY
Port 9/2 READY
Port 9/3 READY
Port 9/4 READY
Port 9/5 READY
Port 9/6 READY
Port 9/7 READY
Port 9/8 READY
module slot Identifies the module in the specified slot.
Release Modification
1.1(1) This command was introduced.
To Next Page
Loading...
Need help?
General