Send documentation comments to mdsfeedback-doc@cisco.com
4-73
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear rmon alarms
clear rmon alarms
To clear all the 32-bit remote monitoring (RMON) alarms from the running configuration, use the clear
rmon alarms command.
clear rmon alarms
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines You must save the changes to startup configuration to make them permanent.
Examples The following example clears all 32-bit RMON alarms from the running configuration.
switch# clear rmon alarms
switch#
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
clear rmon hcalarms Clears all the 64-bit RMON alarms.
clear rmon all-alarms Clears all the 32-bit and 64-bit RMON alarms.
clear rmon log Clears RMON log information.
To Next Page
Loading...
Need help?
General