Send documentation comments to mdsfeedback-doc@cisco.com
22-230
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show logging
show logging
To display the current message logging configuration, use the show logging command.
show logging [console | info | last lines | level facility | logfile | module | monitor |
nvram [last lines] | onboard information | pending | pending-diff | server | status]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
console Displays console logging configuration.
info Displays logging configuration.
last lines Displays last few lines of the log file. The range is 1 to 9999.
level facility Displays facility logging configuration. Facility values include aaa, acl,
auth, authpriv, bootvar, callhome, cdp, cfs, cimserver, cron, daemon,
device-alias, dstats, ethport, fc2d, fcc, fcd, fcdomain, fcns, fcsp-mgr,
fdmi, ficon, flogi, fspf, ftp, ike, ipacl, ipconf, ipfc, ips, ipsec, isns, kernel,
license, localn, lpr, mail, mcast, module, news, platform, port,
port-security, qos, radius, rdl, rib, rlir,
rscn, scsi-target, security,
syslog, sysmgr, systemhealth, tacacs, tlport, user, uucp, vni, vrrp-cfg,
vsan, vshd, wwm, xbar, zone.
logfile Displays contents of the log file.
module Displays module logging configuration.
monitor Displays monitor logging configuration.
nvram Displays NVRAM log.
onboard information Displays onboard failure logging (OBFL) information. The types of
information include boot-uptime, cpu-hog, device-version, endtime,
environmental-history, error-stats, exception-log, interrupt-stats,
mem-leak, miscellaneous-error, module, obfl-history, obfl-logs,
register-log, stack-trace, starttime, status, system-health.
pending Displays the server address pending configuration.
pending-diff Displays the server address pending configuration differences with the
active configuration.
server Displays server logging configuration.
status Displays the status of the last operation.
Release Modification
1.3(1) This command was introduced.
2.0(x) Added the pending, pending-diff, and status keywords.
3.0(1) Added the onboard keyword.
To Next Page
Loading...
Need help?
General