Send documentation comments to mdsfeedback-doc@cisco.com
18-33
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
poweroff module
poweroff module
To power off individual modules in the system, use the poweroff module command in configuration
mode. Use the no form of this command to power up the specified module.
poweroff module slot
no poweroff module slot
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines Use the poweroff module command to power off individual modules. The poweroff module command
cannot be used to power off supervisor modules.
Examples The following example powers off and powers up module 1.
switch# config terminal
switch(config)# poweroff module 1
switch(config)#
switch(config)# no poweroff module 1
switch(config)#
Related Commands
slot Specifies the slot number for the module.
Release Modification
1.0(2) This command was introduced.
Command Description
show module Displays information for a specified module.
copy running-config
startup-config
Copies all running configuration to the startup configuration.
To Next Page
Loading...
Need help?
General