Send documentation comments to mdsfeedback-doc@cisco.com
23-4
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tacacs+ distribute
tacacs+ distribute
To enable Cisco Fabric Services (CFS) distribution for TACACS+, use the tacacs+ distribute command.
To disable this feature, use the no form of the command.
tacacs+ distribute
no tacacs+ distribute
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to enable TACACS+ fabric distribution.
switch# config terminal
switch(config)# tacacs+ distribute
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
show tacacs+ Displays TACACS+ CFS distribution status and other details.
tacacs+ commit Commits TACACS+ database changes to the fabric.
tacacs+ enable Enables TACACS+.
To Next Page
Loading...
Need help?
General