Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-381
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show vrrp
show vrrp
To display the VRRP configuration information, use the show vrrp command.
show vrrp [ipv6 vr group-id [interface {gigabitethernet slot/port {configuration | statistics |
status} | mgmt 0 {configuration | statistics | status} | port-channel port-channel
{configuration | statistics | status } | vsan vsan-id {configuration | statistics | status}}]] |
statistics |
vr group-id [interface {gigabitethernet slot/port {configuration | statistics | status} | mgmt
0 {configuration | statistics | status} | port-channel port-channel {configuration | statistics
| status } | vsan vsan-id {configuration | or statistics | status}}]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays VRRP configured information.
switch# show vrrp vr 7 interface vsan 2 configuration
ipv6 Displays IPv6 virtual router information.
vr Displays the virtual router information.
group-id Specifies the group ID. The range is 1 to 255.
interface Displays the interface type.
gigabitethernet Displays the Gigabit Ethernet interface.
slot/port Specifies the slot and port.
configuration Displays the VRRP configuration.
statistics Displays cumulative VRRP statistics.
status Displays VRRP operational status.
mgmt 0 Displays the mgmt0 interface.
port-channel Displays the Port Channel interface.
port-channel Specifies the Port Channel.
vsan Displays the VSAN interface.
vsan-id Specifies the VSAN ID.
Release Modification
1.0(2) This command was introduced.
3.0(1) Added the IPv6 option.