EasyManua.ls Logo

Cisco mds 9124 - fabric switch

Cisco mds 9124 - fabric switch
1550 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Send documentation comments to mdsfeedback-doc@cisco.com
22-206
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb vrrp
Interface GigabitEthernet1/2.441
Switch wwn: 20:00:00:0d:ec:02:cb:00
VRRP group id: 41, VRRP IP address: 10.10.122.112
Interface VRRP state: backup
Interface load: 2000
Interface redirection: enabled
Group redirection: enabled
Number of physical IP address: 1
(1) 10.10.122.114
Port vsan: 1
Forwarding mode: store-and-forward
Proxy initiator mode: disabled
iSCSI authentication: CHAP or None
Interface GigabitEthernet2/1.441
Switch wwn: 20:00:00:0d:ec:0c:6b:c0
VRRP group id: 41, VRRP IP address: 10.10.122.112
Interface VRRP state: backup
Interface load: 2000
Interface redirection: enabled
Group redirection: enabled
Number of physical IP address: 1
(1) 10.10.122.111
Port vsan: 1
Forwarding mode: store-and-forward
Proxy initiator mode: disabled
iSCSI authentication: CHAP or None
Interface GigabitEthernet2/2.441
Switch wwn: 20:00:00:0d:ec:0c:6b:c0
VRRP group id: 41, VRRP IP address: 10.10.122.112
Interface VRRP state: master
Interface load: 1000
Interface redirection: enabled
Group redirection: enabled
Number of physical IP address: 1
(1) 10.10.122.112
Port vsan: 1
Forwarding mode: store-and-forward
Proxy initiator mode: disabled
iSCSI authentication: CHAP or None
Interface GigabitEthernet2/3.441
Switch wwn: 20:00:00:0d:ec:0c:6b:c0
VRRP group id: 41, VRRP IP address: 10.10.122.112
Interface VRRP state: backup
Interface load: 2000
Interface redirection: enabled
Group redirection: enabled
Number of physical IP address: 1
(1) 10.10.122.113
Port vsan: 1
Forwarding mode: store-and-forward
Proxy initiator mode: disabled
iSCSI authentication: CHAP or None
The following example shows iSLB VRRP summary information.
switch# show islb vrrp summary
-- Groups For Load Balance --
--------------------------------------------------------------------------------
VR Id VRRP Address Type Configured Status
--------------------------------------------------------------------------------

Table of Contents

Related product manuals