Send documentation comments to mdsfeedback-doc@cisco.com
26-5
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 26 W Commands
write-accelerator
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# write-accelerator tape-accelerator
The following command disables tape acceleration on the specified FCIP interface.
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# no write-accelerator tape-acceleration
The following command disables both write acceleration and tape acceleration on the specified FCIP
interface.
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# no write-accelerator
Related Commands Command Description
show interface fcip Displays an interface configuration for a specified FCIP interface.
To Next Page
Loading...
Need help?
General