Send documentation comments to mdsfeedback-doc@cisco.com
5-33
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
distribute
distribute
To enable distribution of the Call Home function using CFS, use the distribute command in Call Home
configuration submode. To disable this feature, use the no form of the command.
distribute
no distribute
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Call Home configuration submode.
Command History
Usage Guidelines None.
Examples The following example shows how to enable distribution of the Call Home function using CFS.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# callhome
switch(config-callhome)# distribute
Related Commands
Release Modification
2.0(1b) This command was introduced.
Command Description
callhome Configures the Call Home function.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.