Send documentation comments to mdsfeedback-doc@cisco.com
14-15
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 14 L Commands
logging commit
logging commit
To apply the pending configuration pertaining to the logging Cisco Fabric Services (CFS) distribution
session in progress in the fabric, use the logging commit command in configuration mode.
logging commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines None.
Examples The following example shows how to commit changes to the active logging configuration.
switch# config terminal
switch(config)# logging commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
show logging Displays logging information.
To Next Page
Loading...
Need help?
General