Send documentation comments to mdsfeedback-doc@cisco.com
4-3
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
callhome
switch# config terminal
config terminal
switch# snmp-server contact personname@companyname.com
switch(config)# callhome
switch(config-callhome)# email-contact username@company.com
switch(config-callhome)# phone-contact +1-800-123-4567
switch(config-callhome)# streetaddress 1234 Picaboo Street, Any city, Any state, 12345
switch(config-callhome)# switch-priority 0
switch(config-callhome)# customer-id Customer1234
switch(config-callhome)# site-id Site1ManhattanNY
switch(config-callhome)# contract-id Company1234
The following example configures a user-defined show command for an alert-group license:
switch(config-callhome)# alert-group license user-def-cmd "show license usage"
Note The show command must be enclosed in double quotes.
The following example removes a user-defined show command for an alert-group license:
switch(config-callhome)# no alert-group license user-def-cmd "show license usage"
Related Commands Command Description
alert-group Customizes a CallHome alert group with user-defined show commands.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.
To Next Page
Loading...
