Send documentation comments to mdsfeedback-doc@cisco.com
24-2
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 24 U Commands
undebug all
undebug all
To disable all debugging, use the undebug all command.
undebug all
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines Use this command to turn off all debugging.
Examples The following example shows how to disable all debugging on the switch.
switch# undebug all
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Also disables all debug commands configured on the switch.
show debug Displays all debug commands configured on the switch.
To Next Page
Loading...
Need help?
General