Send documentation comments to mdsfeedback-doc@cisco.com
11-146
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr zoneset rename
ivr zoneset rename
To rename an inter-VSAN routing (IVR) zone set, use the ivr zoneset rename command.
ivr zoneset rename current-name new-name
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example renames the IVR zone set from north to south.
switch# ivr zoneset rename north south
Related Commands
current-name Specifies the current zone set name. The maximum size is 64 characters.
new-name Specifies the new zone set name. The maximum size is 64 characters.
Release Modification
3.0(1) This command was introduced.
Command Description
ivr zoneset name Creates and configures an IVR zone set.
show ivr Displays IVR information.
To Next Page
Loading...
Need help?
General