Send documentation comments to mdsfeedback-doc@cisco.com
4-75
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear rmon hcalarms
clear rmon hcalarms
To clear all the 64-bit RMON alarms from the running configuration, use the clear rmon hcalarms
command.
clear rmon hcalarms
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines You must save the changes to startup configuration to make them permanent.
Examples The following example clears all the 64-bit RMON alarms from the running configuration.
switch# clear rmon hcalarms
switch#
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
clear rmon alarms Clears all the 32-bit RMON alarms.
clear rmon all-alarms Clears all the 32-bit and 64-bit RMON alarms.
clear rmon log Clears RMON log information.
To Next Page
Loading...
Need help?
General