Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
4-102
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
cloud discover
cloud discover
To initiate manual, on-demand cloud discovery, use the cloud discover command.
cloud discover [interface {gigabitethernet slot/port | port-channel port-channel-number}]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example initiates manual, on-demand cloud discovery.
switch# cloud discover
The following example initiates manual, on-demand cloud discovery on Gigabit Ethernet interface 2/2.
switch# cloud discover interface gigabitethernet 2/2
Related Commands
interface Specifies an interface for cloud discovery.
gigabitethernet
slot/port
Specifies a Gigabit Ethernet interface.
port-channel
port-channel-number
Specifies a PortChannel interface. The range for the PortChannel number is
1 to 256.
Release Modification
3.0(1) This command was introduced.
Command Description
cloud discovery Configures cloud discovery.
cloud-discovery enable Enables discovery of cloud memberships.
show cloud discovery Displays discovery information about the cloud.
show cloud membership Displays information about members of the cloud.