Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-307
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show santap module
avt vsan = 4
avt if_index = 0x1080000
hi pwwn = 21:00:00:e0:8b:07:61:aa
tgt pwwn = 22:00:00:20:37:88:20:ef
tgt vsan = 1
The following example displays the SANTap AVT LUN configuration.
switch# show santap module 2 avtlun
AVT LUN Information :
avt pwwn = 2a:4b:00:05:30:00:22:25
avt lun = 0x0
xmap id = 16
avt id = 12
tgt lun = 0x0
The following example displays the SANTap CVT configuration.
switch# show santap module 2 cvt
CVT Information :
cvt pwwn = 25:3c:00:05:30:00:22:25
cvt nwwn = 25:3d:00:05:30:00:22:25
cvt id = 1
cvt xmap_id = 2
cvt vsan = 10
The following example displays the SANTap DVT configuration.
switch# show santap module 2 dvt
DVT Information :
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt nwwn = 20:00:00:20:37:88:20:ef
dvt id = 3
dvt mode = 3
dvt vsan = 3
dvt fp_port = 0
dvt if_index = 0x1080000
dvt name = MYDVT
The following example displays the SANTap DVTLUN configuration.
switch# show santap module 2 dvtlun
DVT LUN Information :
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt lun = 0x0
xmap id = 8
dvt id = 3
dvt mode = 0
dvt vsan = 3
tgt pwwn = 22:00:00:20:37:88:20:ef
tgt lun = 0x0
tgt vsan = 1
The following example displays the SANTap configuration session.
switch# show santap module 2 session
Session Information :
session id = 1
host pwwn = 21:00:00:e0:8b:07:61:aa
dvt pwwn = 22:00:00:20:37:88:20:ef