Send documentation comments to mdsfeedback-doc@cisco.com
8-32
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fcinterop fcid-allocation
fcinterop fcid-allocation
To allocate FCIDs on the switch, use the fcinterop fcid-allocation command in configuration mode. To
disable FCIDs on the switch, use the no form of the command.
fcinterop fcid-allocation {auto | flat | none}
no fcinterop fcid-allocation {auto | flat | none}
Syntax Description
Defaults The default is fcinterop fcid-allocation auto.
Command Modes Configuration mode.
Command History
Usage Guidelines This command defines how the switch assigns FCIDs.
Examples switch# config terminal
switch(config)# fcinterop fcid-allocation none
switch(config)# fcinterop fcid-allocation flat
switch(config)# fcinterop fcid-allocation auto
Related Commands
auto Assigns single FCID to compatible HBAs.
flat Assign single FCID.
none Assigns FCID range.
Release Modification
1.0(2) This command was introduced.
Command Description
show flogi database Displays the fabric login (FLOGI) table.
To Next Page
Loading...
Need help?
General