Send documentation comments to mdsfeedback-doc@cisco.com
6-26
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug exceptionlog
debug exceptionlog
To enable the exception log debugging feature, use the debug exceptionlog command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
debug exceptionlog {demux | deque | error | flow | info}
no debug exceptionlog {demux | deque | error | flow | info}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug exceptionlog command is issued:
switch# debug exceptionlog
7), credit(3), empty
Related Commands
demux Enables debugging for the exception logger demux functions.
deque Enables debugging for the exception logger deque function.
error Enables debugging for exception logger errors.
flow Enables debugging for the exception logger flow.
info Enables debugging for exception logger information.
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Disables all debugging.
To Next Page
Loading...
Need help?
General