Send documentation comments to mdsfeedback-doc@cisco.com
20-34
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 20 R Commands
role name
role name
To configure and assign users to a new role or to modify the profile for an existing role, use the role
name command in configuration mode. Use the no form of this command to delete a configured role.
role name name [description user description] [rule number permit clear feature name |permit
config feature name | permit debug feature name | permit show feature name] [rule number
deny clear feature name | deny config feature name | deny debug feature name | deny exec
feature name | deny show feature name]
no role name name [description user description] [rule number permit clear feature name |
permit config feature name | permit debug feature name | permit show feature name] [rule
number deny clear feature name | deny config feature name | deny debug feature name | deny
exec feature name | deny show feature name]
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
name Name of the role to be created or modified. The maximum number of roles
is 64.
description Add a description for the role. The maximum size is 80.
user description Add description of users to the role.
exit Exit from this submode
no Negate a command or set its defaults
rule Enter the rule keyword.
number Enter the rule number 1-16.
permit Add commands to the role.
deny Remove commands from the role.
clear Clear commands
config Configuration commands
debug Debug commands
show Show commands
feature Enter the feature name
exec Exec commands
name Enter the feature name (Max Size - 32)
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General