Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
4-24
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
cimserver clearcertificate
cimserver clearcertificate
To clear the cimserver certificate, use the cimsever clearcertificate command in configuration mode.
cimserver clearcertificate
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode
Command History
Usage Guidelines You need not specify the certificate name.
Examples The following example shows how to clear the cimserver certificate.
switch# config
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# cimserver clearcertificate
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
show cimserver
certificate name
Displays cimserver certificate file name.