Send documentation comments to mdsfeedback-doc@cisco.com
23-34
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tcp max-retransmissions
tcp max-retransmissions
To specify the maximum number of times a packet is retransmitted before TCP decides to close the
connection, use the tcp max-retransmissions command. Use the no form of this command to disable
this feature or revert to its factory defaults.
tcp max-retransmissions number
no tcp max-retransmissions number
Syntax Description
Defaults Enabled.
Command Modes FCIP profile configuration submode.
Command History
Usage Guidelines The default is 4 and the range is from 1 to 8 retransmissions.
Examples The following example configures a FCIP profile:
switch# config terminal
switch(config)# fcip profile 5
The following example specifies the maximum number of retransmissions :
switch(config-profile)# tcp max-retransmissions 6
Related Commands
number Specifies the maximum number. The range is 1 to 8.
Release Modification
1.1(1) This command was introduced.
Command Description
fcip profile Configures FCIP profile parameters.
show fcip profile Displays FCIP profile information.
To Next Page
Loading...
Need help?
General