Send documentation comments to mdsfeedback-doc@cisco.com
22-331
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show span drop-counters
show span drop-counters
To display the SPAN drop-counters, use the show span drop-counters command.
show span drop-counters
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines This command is supported only on a ISOLA platform.
Examples The following example shows how to configure the SPAN drop-counters.
switch#config
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# span drop-counters
SPAN Drop-Counters for module 3 is: 0x0
SPAN Drop-Counters for module 7 is: 0x0
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
show span
max-queued-packets
Displays the SPAN max-queued-packets.
To Next Page
Loading...
Need help?
General