Send documentation comments to mdsfeedback-doc@cisco.com
22-332
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show span max-queued-packets
show span max-queued-packets
To display the SPAN max-queued-packets, use the show span max-queued-packets command.
show span max-queued-packets
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines This command is supported only ona ISOLA platform.
Examples The following example displays the SPAN max-queued-packets.
switch# show span max-queued-packets
max-queued-packets for SPAN sessions: 1
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
span
max-queued-packets
Configures the SPAN max-queued-packets.
To Next Page
Loading...
Need help?
General