Send documentation comments to mdsfeedback-doc@cisco.com
22-80
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcdroplatency
show fcdroplatency
To display the configured Fibre Channel latency parameters, use the show fcdroplatency command.
show fcdroplatency [network | switch]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the configured Fibre Channel latency parameters.
switch# show fcdroplatency
switch latency value:4000 milliseconds
network latency value:5000 milliseconds
network Network latency in milliseconds.
switch Switch latency in milliseconds.
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General