Send documentation comments to mdsfeedback-doc@cisco.com
22-215
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ivr
show ivr
To display various Inter-VSAN Routing (IVR) configurations, use the show ivr command.
show ivr [pending | pending-diff | session status | virtual-domains [vsan vsan-id] |
virtual-fcdomain-add-status | vsan-topology [active | configured] | zone [active | name name
[active]] | zoneset [active | brief | fabric | name name | status]]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines To access this command, you must perform the ivr enable command.
Examples The following example displays the status of the IVR virtual domain configuration.
merge Displays the IVR merge status.
pending Displays the IVR pending configuration.
pending-diff Displays the IVR pending configuration differences with the active
configuration.
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
session Displays the IVR session status.
status Displays the status of the configured IVR session.
virtual-domains Displays IVR virtual domains for all local VSANs.
virtual-fcdomain-add-st
atus
Displays IVR virtual fcdomain status.
vsan-topology Displays the IVR VSAN topology
active Displays the active IVR facilities.
configured Displays the configured IVR facilities
zone Displays the Inter-VSA Zone (IVZ) configurations.
name name Specifies the name as configured in the database.
zoneset Displays the Inter-VSA Zone Set (IVZS) configurations.
brief Displays configured information in brief format.
fabric Displays the status of active zone set in the fabric.
Release Modification
1.3(1) This command was introduced.
2.0(1b) Added the pending and pending-diff keywords.
To Next Page
Loading...
Need help?
General