Send documentation comments to mdsfeedback-doc@cisco.com
22-118
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show flex-attach info
show flex-attach info
To display the FlexAttach information, use the show flex-attach info command.
show flex-attach info
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Exec mode
Command History
Usage Guidelines None.
Examples The following example displays the FlexAttach information.
switch# show flex-attach info
Global Auto Flag : TRUE
-------------------------------------------------------------
Local Interface->vpwwn
-------------------------------------------------------------
vsan intf vpwwn auto intf-state
-------------------------------------------------------------
all fc1/1 20:00:00:05:30:01:71:ba auto DOWN
all fc1/2 20:01:00:05:30:01:71:ba auto DOWN
all fc1/3 20:02:00:05:30:01:71:ba auto DOWN
all fc1/4 20:03:00:05:30:01:71:ba auto DOWN
all fc1/20 20:13:00:05:30:01:71:ba auto DOWN
all fc1/21 20:14:00:05:30:01:71:ba auto DOWN
all fc1/22 20:15:00:05:30:01:71:ba auto DOWN
all fc1/23 20:16:00:05:30:01:71:ba auto DOWN
all fc1/24 20:17:00:05:30:01:71:ba auto DOWN
Number of local virtual pwwn entries = 24
------------------------------------------------------------------------
Remote Interface->vpwwn
------------------------------------------------------------------------
swwn vsan intf vpwwn auto
------------------------------------------------------------------------
20:00:00:05:30:01:6e:1c all fc1/1 23:46:00:05:30:01:6e:1e auto
20:00:00:05:30:01:6e:1c all fc1/2 23:47:00:05:30:01:6e:1e auto
20:00:00:05:30:01:6e:1c all fc1/3 23:48:00:05:30:01:6e:1e auto
20:00:00:05:30:01:6e:1c all fc1/4 23:49:00:05:30:01:6e:1e auto
20:00:00:05:30:01:6e:1c all fc1/5 23:4a:00:05:30:01:6e:1e auto
20:00:00:05:30:01:6e:1c all fc1/6 23:4b:00:05:30:01:6e:1e auto
20:00:00:05:30:01:6e:1c all fc1/7 23:4c:00:05:30:01:6e:1e auto
Release Modification
3.3(1a) This command was introduced.