Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-200
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show islb session
show islb session
To display iSLB session information, use the show islb session command.
show islb session [detail | incoming | initiator initiator-node-name | iscsi slot-number | outgoing
| target target-node-name]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows iSLB session information.
switch# show islb session
Initiator iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed96377653c8
Session #1
Target iqn.com.domainname.172.22.93.143.08-03.gw.22000020374b5247
VSAN 1, ISID 000000000000, Status active, no reservation
Session #2
Target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d
VSAN 1, ISID 000000000000, Status active, no reservation
Initiator iqn.1987-05.com.cisco:02.91b0ee2e8aa1.iscsi16-w2k
Session #1
Discovery session, ISID 00023d00022f, Status active
Session #2
Target iqn.com.domainname.172.22.93.143.08-03.gw.2200002037388bc2
VSAN 1, ISID 00023d000230, Status active, no reservation
detail Displays detailed iSLB session information.
incoming Displays incoming iSLB sessions.
initiator
initiator-node-name
Displays session information for a specific iSLB initiator. The maximum
size for the initiator node name is 80.
iscsi slot-port Specifies the iSCSI interface.
outgoing Displays outgoing iSLB sessions.
target Displays session information for a specific iSLB target. The maximum size
for the target node name is 80.
Release Modification
3.0(1) This command was introduced.