Send documentation comments to mdsfeedback-doc@cisco.com
27-11
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zone merge-control restrict vsan
zone merge-control restrict vsan
To restrict zone database merging, use the zone merge-control restrict vsan command in configuration
mode. To disable this feature, use the no form of the command.
zone merge-control restrict vsan vsan-id
no zone merge-control restrict vsan vsan-id
Syntax Description
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines If merge control setting is restricted and the two databases are not identical, the ISLs between the
switches are isolated.
Examples The following example shows how to configure zone merge control.
switch# config terminal
switch(config)# zone merge-control restrict vsan 10
Related Commands
vsan-id Specifies the VSAN ID. The range is 1 to 4093.
Release Modification
2.0(x) This command was introduced.
Command Description
show zone Displays zone information.
To Next Page
Loading...
Need help?
General