Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-84
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fc-redirect configs
show fc-redirect configs
To display all the current configuration mode on a switch, use the show fc-redirect configs command.
show fc-redirect configs
Syntax Description
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines None.
Examples The following example displays the current configuration mode on a switch.
switch# show fc-redirect configs
Configuration Mode = MODE_V1
Config#1
==========
Appl UUID = 0x00D8 (ISAPI CFGD Service)
SSM Slot = 2
SSM Switch WWN = 20:00:00:05:30:00:90:9e (LOCAL)
Vt PWWN = 2f:ea:00:05:30:00:71:61
Tgt PWWN = 21:00:00:20:37:38:89:86
Host 1: Host PWWN = 21:00:00:e0:8b:0d:12:c6
VI PWWN = 2f:ec:00:05:30:00:71:61
Config#2
==========
Appl UUID = 0x00D8 (ISAPI CFGD Service)
SSM Slot = 2
SSM Switch WWN = 20:00:00:05:30:00:90:9e (LOCAL)
Vt PWWN = 2f:ea:00:05:30:00:71:62
Tgt PWWN = 21:00:00:20:37:38:a9:0a
Host 1: Host PWWN = 21:00:00:e0:8b:0d:12:c7
VI PWWN = 2f:ec:00:05:30:00:71:62
Related Commands=
This command has no arguments or keywords.
Release Modification
3.2(1) This command was introduced.
3.3(1a) Added the configuration mode information to the command output.
Command Description
show fc-redirect
active-configs
Displays all active configurations on a switch.