Send documentation comments to mdsfeedback-doc@cisco.com
4-37
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear debug-logfile
clear debug-logfile
To delete the debug logfile, use the clear debug-logfile command in EXEC mode.
clear debug-logfile filename
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Examples The following example shows how to clear the debug logfile.
switch# clear debug-logfile debuglog
Related Commands
filename The name (restricted to 80 characters) of the log file to be cleared. The
maximum size of the log file is 1024 bytes.
Release Modification
1.0(2) This command was introduced.
Command Description
show debug logfilw Displays the logfile contents.
To Next Page
Loading...
Need help?
General