Send documentation comments to mdsfeedback-doc@cisco.com
15-9
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 15 M Commands
member (ivr zone configuration)
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ivr zone name IvrLunZone
switch(config-ivr-zone)# member device-alias Switch4 vsan 1 autonomous-fabric-id 14
The following example shows how to configures an IVR zone member based on the pWWN, VSAN, and
the AFID.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ivr zone name IvrLunZone
switch(config-ivr-zone)# member pwwn 29:00:00:05:30:00:06:ea vsan 1 autonomous-fabric-id
14
Related Commands Command Description
show ivr zone Displays the IVR zone information.
To Next Page
Loading...
Need help?
General