Send documentation comments to mdsfeedback-doc@cisco.com
21-109
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system startup-config
system startup-config
To release a system startup configuration lock, use the system startup-config command in EXEC mode.
system startup-config unlock lock-id
Syntax Description
Defaults Disabled.
Command Modes EXEC.
Command History
Usage Guidelines The system startup-config command allows you to unlock or release the rr_token lock. To determine
the lock-id, use the show system internal sysmgr startup-config locks command.
Examples The following example releases the system configuration lock with identifier 1.
switch# system startup-config unlock 1
Related Commands
unlock lock-id Configures the system startup-config unlock ID number. The range is 0 to
65536.
Release Modification
2.0(1b) This command was introduced.
Command Description
show system Displays system information.
To Next Page
Loading...
Need help?
General