Send documentation comments to mdsfeedback-doc@cisco.com
20-44
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 20 R Commands
rule
rule
To specify the tape volume group regular expression, use the rule command. To disable this feature, use
the no form of the command.
rule {range range | regexp regular expression}
no rule {range range | regexp regular expression}
Syntax Description
Defaults None.
Command Modes Cisco SME crypto tape volume group configuration submode.
Command History
Usage Guidelines None.
Examples The following example specifies the volume group regular expression:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# tape-volgrp tv1
switch(config-sme-cl-tape-bkgrp-volgrp)#rule regexp r1
Related Commands
range range Specifies the crypto tape volume barcode range. The maximum length
is 32 characters.
regexp regular expression Specifies the volume group regular expression. The maximum length
is 32 characters.
Release Modification
3.2(2) This command was introduced.
Command Description
show sme cluster Displays information about Cisco SME cluster.
tape-bkgrp groupname Configures crypto backup group.
tape-volgrp volume groupname Configures crypto backup volume group.
To Next Page
Loading...
Need help?
General