Cisco mds 9124 - fabric switch User Manual

Send documentation comments to mdsfeedback-doc@cisco.com
22-76
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show fcdomain
show fcdomain
To display the Fibre Channel domain (fcdomain) information, use the show fcdomain command.
show fcdomain [address-allocation [cache] |
allowed |
domain-list |
fcid persistent [unused] |
pending [vsan vsan-id] |
pending-diff [vsan vsan-id] |
session-status [vsan vsan-id] |
statistics [interface {fc slot/port [vsan vsan-id] | fcip fcip-id [vsan vsan-id] | iscsi slot/port} |
port-channel [vsan vsan-id]] |
status |
vsan vsan-id]
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description address-allocation Displays statistics for the FC ID allocation.
cache Reassigns the FC IDs for a device (disk or host) that exited and reentered
the fabric for the principal switch. In the cache content, VSAN refers to
the VSAN that contains the device, WWN refers to the device that owned
the FC IDs, and mask refers to a single or entire area of FC IDs.
allowed Displays a list of allowed domain IDs.
domain-list Displays a list of domain IDs granted by the principal switch.
fcid persistent Displays persistent FC IDs (across reboot)
pending Displays the pending configuration.
pending-diff Displays the difference between the running configuration and the
pending configuration.
session-status Displays the last action performed by FC domain.
vsan vsan-id Specifies a VSAN ID. The range is 1 to 4093.
statistics Displays the statistics of FC domain
interface Specifies an interface.
fc slot/port (Optional) Specifies a Fibre Channel interface on a Cisco MDS 9000
Family Switch.
bay port | ext port (Optional) Specifies a Fibre Channel interface on a Cisco MDS 9124
Fabric Switch, a Cisco Fabric Switch for HP c-Class BladeSystem, and a
Cisco Fabric Switch for IBM BladeCenter.
fcip fcip-id Specifies an FCIP interface. The range is 1 to 255.
iscsi slot/port Specifies an iSCSI interface.
port-channel number Specifies a PortChannel interface. The range is 1 to 128.
status Displays all VSAN-independent information in FC domain.

Cisco mds 9124 - fabric switch Specifications

General

Brand	Cisco
Model	mds 9124 - fabric switch
Category	Switch
Language	English