Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
4-29
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear arp-cache
clear arp-cache
To clear the ARP cache table entries, use the clear arp-cache command in EXEC mode.
clear arp-cache
Syntax Description This command has no arguments or keywords.
Defaults The ARP table is empty by default.
Command Modes EXEC mode.
Command History
Examples The following example shows how to clear the arp-cache table entries.
switch# clear arp-cache
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
show arp Displays Address Resolution Protocol (ARP) entries.