Send documentation comments to mdsfeedback-doc@cisco.com
11-14
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
install license
install license
To program the supervisor or switching module BIOS, use the install license command.
install license [bootflash: | slot0: | volatile:] file-name
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines If a target file name is provided after the source URL, the license file is installed with that name.
Otherwise, the filename in the source URL is used. This command also verifies the license file before
installing it.
Examples The following example installs a file named license-file which resides in the bootflash: directory..
switch# install license bootflash:license-file
Related Commands
bootflash: Source location for the license file.
slot0: Source location for the license file.
volatile: Source location for the license file.
file-name The name of the license file.
Release Modification
1.2(1) This command was introduced.
Command Description
show license Displays license information.
To Next Page
Loading...
Need help?
General