Send documentation comments to mdsfeedback-doc@cisco.com
6-51
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug ficon
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines FICON must be enabled on the switch to use this command.
Examples The following example displays the system output when the debug ficon all command is issued:
switch# debug ficon all
2005 Mar 10 02:38:58 ficon: fu_fsm_execute_all: match_msg_id(0), log_already_open(0)
2005 Mar 10 02:38:58 ficon: fu_fsm_execute_all: null fsm_event_list
2005 Mar 10 02:38:58 ficon: fu_fsm_engine_post_event_processing: mts msg
MTS_OPC_DEBUG_WRAP_MSG(msg_id 6943776) dropped
switch# undebug all
Related Commands
event Enables debugging for FICON events.
file-trace Enables debugging of FICON file flow
ha Enables the debugging of HA synchronization messages.
max-port-number ports Specifies maximum number of ports.
pss-trace Enables debugging of FICON PSS flow.
stat Enables debugging of FICON statistics.
all Specifies all debug flags of FICON statistics.
demux Specifies FICON statistics message demux.
deque Specifies FICON statistics message deque.
error Specifies FICON statistics errors.
event Specifies FICON statistics FSM and events.
ha Specifies FICON statistics HA.
trace Specifies FICON statistics trace.
warning Specifies FICON statistics warnings
timer Enables debugging of FICON timer messages.
trace Enables debugging of FICON flow.
Release Modification
1.3(2) This command was introduced.
Command Description
no debug all Disables all debugging.
show ficon Displays configured FICON information.