Send documentation comments to mdsfeedback-doc@cisco.com
22-345
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show switchname
show switchname
To display the switch network name, use the show switchname command.
show switchname [serialnum]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the name of the switch.
switch# show switchname
switch-123
The following example displays the switch name and serial number.
switch# show switchname
switch-123
Serial Number #1 : FOX0712S007
Serial Number #2 :
serialnum Displays switch serial number.
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General