Send documentation comments to mdsfeedback-doc@cisco.com
22-27
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cimserver indications
show cimserver indications
To display cimserver indications such as filters, recipients, and subscriptions, use the show cimserver
indication command.
show cimserver indication
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode
Command History
Usage Guidelines None.
Examples The following example displays the cimserver indications.
switch# show cimserver indication
Filter: root/cimv2:Feb 7, 2008 2:32:11 PM
Query: "SELECT * FROM CISCO_LinkUp"
Query Language: WQL
-----------------------------------------
Handler: root/cimv2:CIM_ListenerDestinationCIMXML.Thu Feb 07 14:32:44 IST
20081202374964083
Destination: http://10.77.91.110:59901
PersistenceType: Transient
-----------------------------------------
Namespace: root/cimv2
Filter: root/cimv2:Feb 7, 2008 2:32:11 PM
Handler: root/cimv2:CIM_ListenerDestinationCIMXML.Thu Feb 07 14:32:44 IST
20081202374964083
Query: "SELECT * FROM CISCO_LinkUp"
Destination: http://10.77.91.110:59901
SubscriptionState: Enabled
The following example displays the cimserver’s indication filters.
switch# show cimserver indication filters
Filter: root/cimv2:Feb 7, 2008 2:32:11 PM
Query: "SELECT * FROM CISCO_LinkUp"
Query Language: WQL
Release Modification
3.3(1a) This command was introduced.
To Next Page
Loading...
Need help?
General